GreenWorks PWA112 Pressure Washer Manual

The GreenWorks PWA112 is a powerful pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 1600 PSI and a flow rate of 1.2 GPM, it is ideal for cleaning driveways, patios, decks, and vehicles. The unit features a lightweight design, making it easy to maneuver, and comes with multiple nozzles for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 1600 PSI pressure output, 1.2 GPM flow rate, multiple nozzle tips, lightweight design, and built-in detergent tank.

Feature	Description
Pressure Output	1600 PSI for effective cleaning
Flow Rate	1.2 GPM for efficient water usage
Nozzle Tips	Includes 0°, 15°, 25°, and soap nozzles
Detergent Tank	Built-in tank for easy soap application
Lightweight Design	Easy to transport and maneuver
Power Cord	35-foot power cord for extended reach
Hose Length	20-foot high-pressure hose
Safety Lock	Prevents accidental operation

Installation

Unpack and inspect contents. Place on a stable surface.

Connect the high-pressure hose to the pressure washer and the spray gun.
Attach the desired nozzle tip to the spray gun.
Fill the detergent tank with appropriate cleaning solution.
Plug into a grounded outlet.

WARNING! Ensure all connections are secure before operation.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Check all connections: Ensure the hose and nozzle are securely attached.
Fill the detergent tank if using soap.
Turn on the water supply before starting the unit.
Press the power button to start the pressure washer.

CAUTION! Do not operate without water supply to avoid damage.

Specifications

Model: GreenWorks PWA112
Max Pressure: 1600 PSI
Flow Rate: 1.2 GPM
Power Source: 13 Amp electric motor
Hose Length: 20 feet
Power Cord Length: 35 feet
Weight: 30 lbs
Dimensions: 15 x 12 x 34 inches

Controls and Settings

Access controls via the power button and nozzle adjustment settings. The unit features a simple interface for easy operation.

Spray Gun: Trigger for operation, adjustable nozzle for spray pattern.

Detergent: Control for soap application from the tank.

Connecting Accessories

Ensure the unit is off before connecting any accessories.

Turn off the pressure washer and disconnect from power.
Attach accessories such as brushes or extension wands as needed.
Secure all connections before operation.

Tip: Refer to the accessory manual for specific instructions.

Operating the Pressure Washer

Follow these steps for effective operation.

Turn on the water supply.
Press the power button to start the unit.
Pull the trigger on the spray gun to begin cleaning.
Adjust the nozzle as needed for different spray patterns.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance.

Check and clean the filter regularly.
Inspect hoses and connections for wear.
Store in a dry place when not in use.
Flush the system with clean water after using detergent.

Safety Information

Read all safety instructions before operating the pressure washer.

Always wear safety goggles and gloves.
Do not operate in wet conditions.
Keep children and pets away from the area.
Disconnect power when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection and outlet.
No pressure	Clogged nozzle	Clean or replace the nozzle tip.
Water leaks	Loose connections	Tighten all hose and connection fittings.
Detergent not dispensing	Clogged detergent line	Clean the detergent line and filter.

Reset: Disconnect power for 5 minutes to reset the unit.

Service: For assistance, contact customer support.