GreenWorks PWA105 Pressure Washer Manual

The GreenWorks PWA105 is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 1500 PSI and a flow rate of 1.2 GPM, it is ideal for tasks such as washing cars, patios, and outdoor furniture. The unit features adjustable pressure settings, a 20-foot high-pressure hose, and multiple nozzles for versatile cleaning options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electric motor, adjustable pressure settings, multiple nozzles, high-pressure hose, detergent tank.

Installation

Unpack and inspect contents. Ensure all parts are included.

1. Connect the high-pressure hose to the pressure washer and the spray gun.
2. Attach the water supply hose to the water inlet.
3. Fill the detergent tank if using detergent.
4. Plug the unit into a grounded outlet.

WARNING! Ensure the unit is off before making connections to avoid injury.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

1. Set the desired pressure level using the adjustable settings.
2. Select the appropriate nozzle for your cleaning task.
3. Turn on the water supply and check for leaks.
4. Test the spray pattern before starting your cleaning task.

CAUTION! Always wear safety goggles and protective gear while operating.

Specifications

• Max Pressure: 1500 PSI.
• Flow Rate: 1.2 GPM.
• Power Source: 120V AC electric.
• Hose Length: 20 feet.
• Weight: 30 lbs.
• Detergent Tank Capacity: 1 liter.
• Noise Level: 85 dB.

Controls and Settings

Access controls on the unit: power switch, pressure adjustment dial, and nozzle selection.

Spray Gun: Trigger, safety lock, and nozzle attachment point.

Adjust pressure settings based on the surface being cleaned for optimal results.

Connecting Accessories

Ensure the pressure washer is off before connecting any accessories.

1. Attach the desired nozzle to the spray gun.
2. Connect any additional accessories as needed.
3. Check all connections for security before powering on.

Tip: Use the correct nozzle for the task to avoid damage to surfaces.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

1. Turn on the water supply and ensure there are no leaks.
2. Power on the pressure washer using the power switch.
3. Pull the trigger on the spray gun to start the flow of water.
4. Adjust the pressure as needed for your cleaning task.
5. After use, turn off the unit and disconnect the hoses.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

1. Clean the filter regularly to prevent clogs.
2. Inspect hoses for wear and tear.
3. Store the unit in a dry place when not in use.
4. Check for leaks and repair as necessary.

CAUTION! Always unplug the unit before performing maintenance.

Safety Information

Read all safety instructions before operating the pressure washer.

• Always wear protective gear, including goggles and gloves.
• Do not operate in wet conditions.
• Keep children and pets away from the work area.
• Never bypass safety features.

Troubleshooting

Reset: Disconnect power and reconnect to reset the unit.

Service: For support, contact GreenWorks customer service.