GreenWorks GPW1804TN Pressure Washer Manual

The GreenWorks GPW1804TN is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a 1800 PSI and 1.1 GPM flow rate, it is ideal for tasks such as washing cars, patios, decks, and driveways. The unit features a lightweight design, making it easy to maneuver, and comes with multiple nozzles for different cleaning applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 1800 PSI motor, adjustable spray nozzles, 35-foot power cord, 25-foot high-pressure hose, and onboard storage for accessories.

FeatureDescription
1800 PSI MotorProvides strong cleaning power for various surfaces
Adjustable Spray NozzlesAllows for different spray patterns for versatile cleaning
Onboard StorageConvenient storage for nozzles and power cord
Lightweight DesignEasy to transport and maneuver during use
35-foot Power CordExtended reach for outdoor cleaning tasks
25-foot High-Pressure HoseDurable hose for extended cleaning range

Installation

Unpack the pressure washer and inspect all components. Place the unit on a stable surface.

  1. Connect the high-pressure hose to the spray gun and the pressure washer.
  2. Attach the desired spray nozzle to the spray gun.
  3. Connect the water supply hose to the water inlet on the pressure washer.
  4. Plug the power cord into a grounded outlet.

WARNING! Ensure all connections are secure before operating the pressure washer.

First-Time Setup

Before using the pressure washer, ensure that all components are properly connected.

  1. Fill the water supply hose with water to remove air.
  2. Turn on the water supply.
  3. Press the trigger on the spray gun to release air and ensure water flow.
  4. Adjust the spray nozzle to the desired setting for your cleaning task.

CAUTION! Always wear appropriate safety gear while operating the pressure washer.

Specifications

Controls and Settings

The pressure washer features an easy-to-use control panel with a power switch and adjustable spray settings.

Spray Gun: Trigger lock, adjustable nozzle for different spray patterns.

Power: Switch to turn the unit on/off.

Connecting Accessories

Ensure the pressure washer is turned off before connecting any accessories.

  1. Attach the desired nozzle to the spray gun.
  2. Connect any additional accessories as needed.
  3. Ensure all connections are secure before use.

Tip: Use the appropriate nozzle for the task to achieve optimal cleaning results.

Operating the Pressure Washer

To operate the pressure washer, follow these steps:

  1. Turn on the water supply.
  2. Plug in the power cord.
  3. Press the power switch to turn on the unit.
  4. Press the trigger on the spray gun to start cleaning.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Do not store the unit in freezing temperatures.

Safety Information

Always follow safety guidelines when operating the pressure washer.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not startNo powerCheck power cord and outlet.
No water pressureClogged nozzleClean or replace the nozzle.
Water leaksLoose connectionsTighten all connections.
Motor runs but no pressureAir in the systemPress the trigger to release air.

Service: For further assistance, contact customer support.

GreenWorks GPW1804TN Pressure Washer Manual © - All Rights Reserved 2026