GreenWorks GPW 2002 Pressure Washer Manual

The GreenWorks GPW 2002 is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 2000 PSI and a flow rate of 1.2 GPM, it is ideal for tackling tough dirt and grime on patios, driveways, vehicles, and more. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 2000 PSI electric motor, adjustable spray nozzle, 20-foot high-pressure hose, detergent tank, and integrated wheels for easy mobility.

Feature	Description
Electric Motor	Powerful motor for efficient cleaning
Adjustable Nozzle	Change spray pattern from narrow to wide
High-Pressure Hose	20-foot hose for extended reach
Detergent Tank	Built-in tank for easy soap application
Wheels	Integrated wheels for easy transport

Installation

Unpack the pressure washer and inspect all components. Place the unit on a stable surface.

Connect the high-pressure hose to the spray gun and the pressure washer.
Attach the garden hose to the water inlet.
Fill the detergent tank if using soap.
Plug the unit into a grounded outlet.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Turn on the water supply and ensure there are no leaks.
Press the power button to start the motor.
Select the desired spray pattern using the adjustable nozzle.
Begin cleaning by pulling the trigger on the spray gun.

CAUTION! Always wear safety goggles and protective gear while operating.

Specifications

Maximum Pressure: 2000 PSI.
Flow Rate: 1.2 GPM.
Power Source: 120V electric motor.
Hose Length: 20 feet high-pressure hose.
Weight: 30 lbs.
Dimensions: 15 x 12 x 34 inches.

Controls and Settings

Access the power button and adjustable nozzle for controlling the pressure washer's operation. The spray gun features a trigger lock for safety.

Connecting Accessories

Connect various accessories such as brushes or extension wands to enhance cleaning capabilities.

Ensure the pressure washer is off before connecting accessories.
Match the accessory to the spray gun's connection.
Securely attach the accessory before use.

Tip: Use compatible accessories for optimal performance.

Operating the Pressure Washer

Follow these steps to effectively operate the pressure washer.

Turn on the water supply and check for leaks.
Press the power button to start the motor.
Adjust the nozzle to the desired spray pattern.
Pull the trigger to begin cleaning.
Release the trigger to stop the spray.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures the longevity of your pressure washer.

After each use, disconnect the water supply and run the unit for a few seconds to clear the hose.
Check and clean the filter regularly.
Store the pressure washer in a dry place.

CAUTION! Unplug the unit before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord issue	Check the power cord and outlet.
No water pressure	Blocked hose/filter	Inspect and clean the hose and filter.
Leaks	Loose connections	Tighten all connections securely.
Motor shuts off	Overheating	Allow the motor to cool down before restarting.

Service: For further assistance, contact customer support.