GreenWorks 5121507AU Pressure Washer manual

The GreenWorks 5121507AU is a powerful electric pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 2000 PSI and a flow rate of 1.2 GPM, it is ideal for tackling tough dirt and grime on patios, driveways, vehicles, and more. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Setup Instructions 4. Specifications 5. Operating Instructions 6. Maintenance 7. Troubleshooting 8. Customer Support

Features at a Glance

Key features include: 2000 PSI maximum pressure, 1.2 GPM flow rate, adjustable spray nozzle, and a 35-foot power cord for extended reach.

Feature	Description
Adjustable Spray Nozzle	Allows for different spray patterns for various cleaning tasks.
Powerful Electric Motor	Delivers high pressure for effective cleaning.
Compact Design	Easy to store and transport.
Onboard Storage	Convenient storage for accessories and hoses.

Safety Information

Always wear safety goggles and protective gear when operating the pressure washer. Ensure the area is clear of bystanders and pets.

Read the manual thoroughly before use.
Do not operate in wet conditions.
Keep electrical connections dry and protected.

WARNING! High-pressure water can cause injury; handle with care.

Setup Instructions

Follow these steps to set up your pressure washer:

Unpack the unit and check for any damage.
Connect the garden hose to the water inlet.
Attach the spray gun and nozzle.
Plug the power cord into a suitable outlet.

CAUTION! Ensure all connections are secure before starting.

Specifications

Model: GreenWorks 5121507AU
Maximum Pressure: 2000 PSI
Flow Rate: 1.2 GPM
Power Source: Electric
Power Cord Length: 35 feet
Weight: 25 lbs
Dimensions: 15 x 12 x 34 inches

Operating Instructions

To operate the pressure washer:

Turn on the water supply.
Press the power button to start the motor.
Adjust the spray nozzle as needed.
Pull the trigger to begin cleaning.

NOTE: Always release the trigger when not in use.

Maintenance

Regular maintenance is essential for optimal performance:

Check and clean the filter regularly.
Inspect hoses for wear or damage.
Store the unit in a dry place when not in use.

CAUTION! Disconnect power before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not plugged in	Check power connection and outlet.
Low pressure	Clogged nozzle	Clean or replace the nozzle.
Water leaks	Loose connections	Tighten all connections securely.
Motor runs but no water	Blocked inlet filter	Clean the inlet filter.

NOTE: Refer to customer support for unresolved issues.

Customer Support

For assistance, contact GreenWorks customer support at 1-800-123-4567 or visit www.greenworks.com.